Search results for "Liquid-Liquid Extraction"
showing 10 items of 17 documents
Mycotoxin Analysis of Human Urine by LC-MS/MS: A Comparative Extraction Study
2017
The lower mycotoxin levels detected in urine make the development of sensitive and accurate analytical methods essential. Three extraction methods, namely salting-out liquid–liquid extraction (SALLE), miniQuEChERS (quick, easy, cheap, effective, rugged, and safe), and dispersive liquid–liquid microextraction (DLLME), were evaluated and compared based on analytical parameters for the quantitative LC-MS/MS measurement of 11 mycotoxins (AFB1, AFB2, AFG1, AFG2, OTA, ZEA, BEA, EN A, EN B, EN A1 and EN B1) in human urine. DLLME was selected as the most appropriate methodology, as it produced better validation results for recovery (79–113%), reproducibility (RSDs < 12%), and repeatability (RSDs…
Application of integrative cloud point extraction and concentration for the analysis of polyphenols and alkaloids in mulberry leaves
2018
Abstract A simple and efficient method based on cloud point extraction and concentration combined with high performance liquid chromatography was developed for the simultaneous separation and determination of five target compounds (deoxynojirimycin, chlorogenic acid, rutin, isoquercitrin and astragalin) in mulberry leaves samples. Firstly, to obtain a high extraction rate, the ultrasound assisted extraction was developed on acid modified Triton X-114 system. Under the optimal conditions, the total maximum extraction yields of five target compounds reached 20.80 mg/g, which was superior to conventional solvent extraction. After the cloud point extraction and concentration, the HPLC analysis …
Experimental investigation on the efficiency of zinc(II) recovery from waste streams by TBP liquid-liquid extraction
2016
In many industrial processes the presence of zinc in the wastewater may represent an obstacle to its high efficient regeneration. This is the case of the treatment of spent pickling solutions aiming the recovery of hydrochloric acid via pyrohydrolysis techniques. Hydrochloric spent pickling solutions from steel processing contain relevant amount of metals such as iron (Fe) and zinc (Zn) that may significantly affect recovery of hydrochloric acid (HCl) through pyrohydrolysis. In fact, although Fe may be recovered as ferric oxide (Fe2O3) and does not have a substantial effect on pyrohydrolysis process, zinc chloride (ZnCl2) evaporating can occlude nozzles and stick to the pyrohydrolysis react…
Method development for determination and recovery of rare earth elements from industrial fly ash
2014
Rare earth elements (REE) are important in numerous high technology applications and in addition their supply risk is high, which gives rise to studying new sources for rare earth elements. Rare earth element concentrations in industrial fly ash samples collected from Finnish power plants, using a mixture of peat and biomass as a fuel, have been determined. Two sample pre-treatment methods, ultrasound- and microwave-assisted acid digestions, have been applied to fly ash samples. Measurement conditions for inductively coupled plasma-optical emission spectrometry (ICP–OES) have been optimized to reach robust plasma conditions and the reliability of the analysis has been investigated by using …
Sample preparation strategies for the determination of psychoactive substances in biological fluids
2020
This review focuses on the existing analytical procedures for the determination of new psychoactive substances (NPS) in biological fluids by chromatographic methods. Direct analysis of samples is scarcely employed and most proposed methodologies include a sample pre-treatment in order to remove matrix interferents and, in some cases, pre-concentrate extracts. Current extraction methods for NPS determination in plasma/serum, urine, and oral fluids have been widely discussed, such as liquid-liquid, solid-phase, and micro extraction approaches, highlighting the advantages and drawbacks of the proposed extraction methodologies. Regarding microextraction approaches, techniques like microextracti…
Quantitative Spatial Analysis of the Mouse Brain Lipidome by Pressurized Liquid Extraction Surface Analysis
2014
Here we describe a novel surface sampling technique termed pressurized liquid extraction surface analysis (PLESA), which in combination with a dedicated high-resolution shotgun lipidomics routine enables both quantification and in-depth structural characterization of molecular lipid species extracted directly from tissue sections. PLESA uses a sealed and pressurized sampling probe that enables the use of chloroform-containing extraction solvents for efficient in situ lipid microextraction with a spatial resolution of 400 μm. Quantification of lipid species is achieved by the inclusion of internal lipid standards in the extraction solvent. The analysis of lipid microextracts by nanoelectrosp…
Determination of 60 Migrant Substances in Plastic Food Contact Materials by Vortex-Assisted Liquid-Liquid Extraction and GC-Q-Orbitrap HRMS
2021
A GC-HRMS analytical method for the determination of 60 migrant substances, including aldehydes, ketones, phthalates and other plasticizers, phenol derivatives, acrylates, and methacrylates, in plastic food contact materials (FCM) has been developed and validated. The proposed method includes migration tests, according to Commission Regulation (EU) 10/2011, using four food simulants (A, B, C, and D1), followed by vortex-assisted liquid–liquid extraction (VA-LLE) and GC-Q-Orbitrap HRMS analysis in selected ion monitoring (SIM) mode, with a resolving power of 30,000 FWHM and a mass accuracy ≤5 ppm. The method was validated, showing satisfactory linearity (R2 ≥ 0.98 from 40 to 400 …
Recovering of zinc(II) from spent pickling solutions by liquid-liquid extraction
2015
Hydrochloric acid can be successfully recovered from spent pickling liquors with high efficiencies via pyrohydrolysis techniques. In the pickling solution feed, other metallic ions are typically present besides iron (mainly Fe2+) such as zinc(II). In order to avoid undesirable effects, zinc(II) has to be removed, because zinc chloride evaporates and sticks to the reactor walls, as well as it contaminates iron oxides product1. Moreover, zinc recovery is economically affordable because it allows the marketing of some products such as ZnCl2 and ZnSO4. In the present work, liquid-liquid extraction process has been selected to recover zinc(II) from pickling liquors, using suitable extractant age…
An effective negative pressure cavitation-microwave assisted extraction for determination of phenolic compounds in P. calliantha H. Andr.
2013
A novel negative pressure and microwave assisted extraction technique (NMAE) was first proposed and applied for extraction of phenolic compounds from pyrola. [C₄MIM]BF₄ aqueous solution was selected as extraction solvent. Optimal extraction conditions were microwave power 700 W, negative pressure -0.07 MPa, temperature 40 °C, liquid-solid ratio 20 : 1, ionic liquid (IL) concentration 0.5 M, extraction time 15 min. The predominance of NMAE was investigated by comparing with microwave-assisted extraction (MAE) and negative pressure cavitation extraction (NPCE) using a first-order kinetics equation. The C∞ values of the target compounds by NMAE were from 0.406 to 5.977 mg g⁻¹ higher than these…
Analysis of ecstasy in oral fluid by ion mobility spectrometry and infrared spectroscopy after liquid-liquid extraction.
2014
We developed and evaluated two different strategies for determining abuse drugs based on (i) the analysis of saliva by ion mobility spectrometry (IMS) after thermal desorption and (ii) the joint use of IMS and infrared (IR) spectroscopy after liquid-liquid microextraction (LLME) to enable the sensitivity-enhanced detection and double confirmation of ecstasy (MDMA) abuse. Both strategies proved effective for the intended purpose. Analysing saliva by IMS after thermal desorption, which provides a limit of detection (LOD) of 160μgL(-1), requires adding 0.2M acetic acid to the sample and using the truncated negative second derivative of the ion mobility spectrum. The joint use of IMS and IR spe…